Mary Yelton

Electrician Services

Classification of Electrical Services You Might Need

Mary Yelton July 30, 2022 Tagged electric services, electrical safety inspections, generator installations, smoke detectors, wiring upgrades

If you’re planning to buy a new home or remodel a business, you may need a three-phase electrical service. Three-phase service uses 120V as the outlet voltage. 208V is...

Choosing the Right Electrical Services Provider

Choosing CT Electrical Services providers are vital to ensuring the safety of your building. Whether you are building a new building or you are updating a building, choosing the right company to service your electrical needs can make all the difference in the world. Unlike branch-circuit tap conductors, service entrance conductors are not protected by an overcurrent device. These conductors can be installed in many locations throughout an electrical circuit. However, there are special requirements that must be followed. A service entrance conductor must be installed in a vault or conduit that is below 18 inches of the ground beneath the structure. It is also important to provide protection for the conductors. Service entrance conductors should be installed in a raceway or vault that is separate from the feeder conductors. This is important because the two types of conductors cannot be mixed. This allows the conductors to be protected from overheating and insulation failure. Service entrance conductors should be bonded at their point of entry into a building. This is an important step in the design and installation process. It will prevent catastrophic failure. Service entrance conductors should have protective devices in each ungrounded conductor. This device must be able to interrupt current. The device must be listed for at least the ampacity rating of the conductor. If the conductor has an overcurrent device, it must be listed for 100 percent of the rating. The ampacity of the conductors must be adjusted for the number of current-carrying conductors in a raceway or vault. This is done by applying the correction factors outlined in Table 310-16. Generally, no more than three conductors should be installed in a single raceway. The conductors must be insulated to prevent short circuits. This should be accomplished by running the conductor between the neutral/ground terminal bar and a grounding electrode system. The ground electrode should be located in a concrete encasement. The insulation on the conductors must be able to withstand 86degF (30degC). A drip loop must be installed to prevent water from traveling along the conductor. It is important to install service conductors and equipment in a safe and functional manner. The proper definition of a service entrance conductor will help to prevent accidents and excess costs. Service entrance conductors can be installed with a variety of different protection methods. These methods include circuit breakers and overcurrent relays. Depending on the method used, the conductors may be grounded or ungrounded. Having a short circuit in your house is an issue that is both a safety hazard and a fire hazard. It can cause serious damage to appliances and even the house itself. There are many common signs of a short circuit. One of the most common is the loss of power. You may also notice a flickering light or even sparks. The best way to prevent a short circuit is to make sure that all appliances are unplugged before switching the breaker back on. If you have a short circuit in your house, it’s a good idea to get it fixed by an electrician. You might not know what caused it, and it’s dangerous to try and fix it on your own. Short circuits can occur in any area of the house, including the kitchen and the bathroom. They can be caused by a broken connection in electrical wiring, loose wires, or even water coming into contact with wires. A short circuit is caused by a broken connection in the electrical wiring, allowing a high volume of electrical current to flow through a short path. During a short circuit, the current is more likely to flow in a path with less resistance, which means less chance of a fire. An electrical short circuit is also called a ground fault. This occurs when a hot wire touches a neutral wire, causing the resistance to drop dramatically. This allows the current to flow through the ground instead of the neutral wire. There are two main types of short circuits. The first is called a standard short circuit and is caused by a broken connection in the wiring. The second is called a ground fault. A ground fault is caused by a hot wire touching the neutral wire in a circuit, allowing a high volume of electrical power to flow through a short path. The most important thing to remember is that a short circuit is a safety hazard. The best way to prevent a shortage is to have an annual electrical inspection done. This will make sure that everything is working properly and that the wiring is in good condition.
The Importance of Proactive Electrical Maintenance

Reactive electrical maintenance focuses on repairs after a system or piece of equipment fails. It’s often very expensive, especially if a major component fails. These kinds of failures can also affect a business’s ability to operate. Fortunately, proactive maintenance can help you avoid these issues. These services include periodic inspections and tests of all types of electrical installations. Inspections also include fire alarms, CCTV and security systems, and lightning protection systems. Reactive maintenance focuses on fixing a problem before it causes a bigger problem. Electrical equipment that isn’t properly maintained can lead to larger electrical surges, which can damage other equipment or cause a higher electric bill. Therefore, it’s important for businesses to incorporate both preventive and reactive maintenance into their electrical system. To hire professionals, visit https://www.electriciansfrederickmd.com/. Reactive electrical maintenance may be easier for some companies to handle and is generally cheaper. However, this method is not ideal for all types of businesses. During reactive maintenance, an electrician will only fix a problem that has been identified rather than preventive maintenance. For example, if a light bulb breaks, a technician will have to replace it. On the other hand, if a piece of machinery is more complex, there may be more risks and fewer benefits from reactive electrical maintenance. Repairs may take longer and result in costly downtime. If your business has multiple locations or electrical systems, you should consider implementing proactive maintenance as opposed to reactive electrical maintenance. A proactive approach to electrical maintenance will help you avoid expensive repairs, extended downtime, and loss of productivity. To implement a proactive maintenance plan, you should start by identifying the mission-critical equipment in your business. You should also establish a regular schedule of maintenance. This will ensure that your team keeps track of problems and identify potential failures before they become major problems. Proper documentation of electrical systems is a vital part of a successful electrical maintenance program. This process should involve every employee within a company. Failure to do so could result in costly delays or catastrophes. To avoid such complications, it’s important to document as much of the electrical system as possible. To meet regulatory requirements, all electrical work must be documented. The documentation should include a signature from the owner and be stored with the electrical system. This documentation is also vital when it comes to selling the property. It shows the professional’s responsibility for the electrical system. This will also make it easier for the new owner to handle future issues. The process for electrical maintenance is similar to that of preventative maintenance but also includes testing for electrical components and direct high-voltage current. Other tests include battery charge, infrared tests, and temperature analysis. It’s essential to identify mission-critical equipment and develop maintenance schedules. Documentation also ensures that electrical maintenance teams are able to raise issues with the appropriate personnel and raise these concerns with management. Electrical maintenance is often dangerous work and requires skilled staff. Employees must be fully trained and qualified to conduct proper inspections, repair worn parts, and replace faulty wiring. Proper documentation can help prevent such problems and ensure that the work is completed safely. A checklist or an electrical safety inspection report can be very helpful in ensuring that the proper safety measures are being taken. Another important part of electrical documentation is electrical schematics. Even minor changes can lead to serious shock hazards, so it is imperative that this information is accurately documented. Failure to do so could result in delays in the repair process. While performing electrical maintenance operations, safety is an important consideration. This type of work is more hazardous than new construction because it is typically performed inside a functional facility. Safety considerations include the protection of the people around the equipment and the surrounding area. These activities are regulated by the Occupational Safety and Health Administration or OSHA.
Job Duties and Education Requirements For Electricians

Electricians In Yakima WA specialize in the installation, maintenance, and repair of electrical equipment and wiring in buildings and other stationary structures. They may also be involved in the installation of new components and electrical infrastructure. They may also perform emergency repairs and installations. The duties and education requirements of this profession vary widely. Read on to learn more about this occupation and its outlook. According to the Bureau of Labor Statistics, employment for electricians is expected to grow by nine percent over the next decade. This increase will be driven by increased construction spending and the increasing demand for alternative energy sources. This will create an increased need for electricians who can connect and install newer power generators. However, the pace of growth will depend on government policies. In general, the best job prospects for electricians will be those who can perform a variety of tasks. An electrician’s job involves installing and repairing electrical wiring and fixtures. They also ensure that their work meets applicable codes and regulations. Other tasks may include installing street lights, electrical control systems, and intercom systems. These tasks may require heavy lifting, so electricians need to be physically fit. They also need to be able to work with noisy machinery and may need to wear hearing protection. They may work independently or supervise other workers in a group. An electrician’s job is physically demanding and can be dangerous if not done correctly. Therefore, a good training program is critical. Many electricians choose to attend technical school before entering an apprenticeship program. This is not required, but it can help. Most people enter an electrician apprenticeship program when they are 18 years old, but it’s not uncommon to see people who enter the field at a younger age. The outlook for electricians is generally good. Most electricians enjoy their jobs, and they typically remain in the same profession for many years. An electrician’s salary is typically high, and there are many opportunities to advance in the field. However, electricians can also expect a slow increase in employment over the next decade. The salary for electricians varies widely depending on their education and experience. Entry-level electricians make up around thirty to fifty percent of what fully-trained electricians make. However, master electricians earn more than seventy thousand dollars a year. An electrician’s job duties include installing and repairing electrical systems. They also design electrical systems. They decide which wiring layout is most appropriate for specific situations and direct their workers to install or repair systems using blueprints and building codes. They use hand and power tools to install wires and wire harnesses and fabricate electrical parts. An electrician’s job description should list the company they work for, their salary (hourly or salary range), and any other benefits. Benefits may include medical coverage, 401K accounts, or paid time off, as well as the use of company-provided safety equipment. Also, be sure to mention if the job requires continuing education or certification. Electricians may also specialize in certain types of electrical projects. For instance, industrial electricians work in factories and industrial settings to install, maintain, and repair electrical power systems. They work with machines and may climb poles to install and repair electrical lines. Residential electricians, on the other hand, work with fixtures and lighting in homes. In addition to providing electrical services, electricians may also be involved in management. These professionals can oversee a work team, manage projects, and develop training programs. They may work independently or in teams with other tradesmen. However, they may be more likely to work in the field of electrical installation and repair than in other occupations. In addition to installing electrical power systems, electricians also install and repair low-voltage cablings such as voice, data, and video outlets. This work is often demanding and requires working nights and weekends. Most electricians obtain their training through apprenticeships. However, some choose to attend technical schools to get a degree. Once they have received their training, most states require electricians to have a license. On average, an electrician earns $60,040 per year. This number is expected to increase by seven percent by 2031. Apprentice electricians are usually required to hold a high school diploma. Many elect to go to technical school to study electrical safety and circuitry. They must also pass a licensing exam. Upon graduation, they may also need to participate in continuing education in order to stay certified. In addition, electricians must have excellent manual dexterity and good eye-hand coordination.
Trusted Ways To Help You Help Yourself

There are a few people out there that can help you learn more knowledge about yourself. There are teachers, therapists, and teachers that can help you understand your thoughts and discuss your feelings. Stress is the foe of the biggest enemies of happiness. Stress in the mind hurts us both mentally and an emotional toll on your body. To be able to think clearly, it is critical to banish unnecessary stress from our minds.Take the time off regularly to relax and reflect. Having a time to refresh can make you more peaceful and happy with yourself. You will miss an opportunity if you put off making the right decision regarding personal development. Do not fear decisions that need to be made, even when you do not have as much information as you would like. Even mistaken decisions are valuable because you still learn from the experiences they give you. A wrong decision will just open up the door for a better one. Read some good books on personal development. A good personal development book on the subject may set you great advice and ideas that can change your life. Try to pick a volume that has several positive reviews because poorly done books in this category are not very well written. Use your work time efficiently so you can get more done in a shorter amount of time.Take an ample amount of breaks regularly to stay focused on what you are working hard. This might seem counterproductive, but having constant breaks will help you recharge and unwind, allowing you to return and work more efficiently. Everyone has values and beliefs in which they define themselves. This practice also promotes consistency, a valuable character trait to keep. Knowing and improving yourself is a privilege you alone receive. If you have a positive relationship with yourself, then it lays a good foundation for every other relationship in your life. In 4 Wood ConferencOzaukee Realtors Association, Physio Therm, Platinum House Apartments, Plumbers Santa Ana Ca, Samantha Marpe, The Beckoning of Lovely, The Mind Optimizer, Trees For Children, Billhar Per Writes, Constructor Conference, Creative Heart Work, Rails With Docker, Royal Pacifica Retirement, Pemako Health Initiative, Deer Park Rotary, The Collective Chichester, Staff And Lantern, Flanders Concrete, Sos Computers, Kindred Collections LLC, Grace Chapel Winnipeg, PSF Virtual Gala, Houston Tx Landscape And Outdoor Spaces, Aire And Calder Partnership, Frank And Bessiesattic, Seo Web Page, The House Of Bled Soe, Classical Hoof Beats Dressage, Stuffed Gourmet Pretzels, Computer Home Therapy, Santilli Flooring, Tampa Bay Homes Guide, Knowledge Broker Blueprints, Enviro Economy Northwest, VR Grant Photography, Oregon Trail Golf Course Ne, Oregon Electric Railway,Vet Pools, Inspected Inns, Easy Arbors
Classification of Electrical Services You Might Need

If you’re planning to buy a new home or remodel a business, you may need a three-phase electrical service. Three-phase service uses 120V as the outlet voltage. 208V is often referred to as a three-phase system, 208Y120. Whether you’re looking to replace your outlet or upgrade to a different circuit, qualified Electrical Contractors will help you with your needs. When your electrical circuit trips, you may need an electrical service company to fix it. There are several reasons why this could happen, including a loose screw in a terminal connection or an appliance drawing too much current. An electrician can also replace your fuses, circuit breaker, or outlet to restore power. Regardless of the reason, electrical services are an important part of running your home, office, or building. Read on to find out what to expect from your next electrician. When it comes to electrical services, it’s important to choose the right one for your needs. Many types of services are available, and you should find out what type you’ll need when you’re talking about your home’s electrical needs. Generally, 120V is used for small appliances and lights. You’ll want to choose one based on the size of your home. You should also consider the voltage that you’re using in your home. A residential electric service provides two types of voltages. A 208V 3-phase electric service is used to power larger loads, while a 120V service provides a standard 120V outlet voltage. A three-phase 208Y120 electrical service will also provide the standard for your home’s outlets. A neutral is neutral and is not connected to a 208V circuit. It’s a separate electrical service, and you should make sure it’s compatible with your existing equipment. A professional electrician will also be able to help you with repairs. They’ll be able to diagnose the problem and provide the proper electrical wiring. They’ll also be able to create new plugs that can be used by multiple appliances. Besides these, an electrician can handle all of the electrical work that your home needs. A licensed electrical contractor will be a valuable asset in your home or business. If you need an electrician, call him today! You can also look for delta services, which provide a single line of power to several outlets. This type of service is best for small loads like outlets. The transformer used is usually 480V Delta208Y120V, which provides a standard 120V for outlets and 600V for small appliances. Three-phase service is ideal for new homes. However, if you’re replacing an existing circuit, it’s better to choose a delta service. Another option is delta service. This is a type of service that’s best for homes with more than one outlet. It offers higher voltage for larger loads and more outlets. 208V is the same as 120V, but it provides less current. You’ll need to choose a service that works well with your home. Once you have your electrical system installed, you can then switch the service to use it in your home. Eventually, you’ll have electricity in your home without having to pay the electric company. Choosing the right electrical service is important for a few reasons. First, a new appliance or light fixture requires special wiring. It will require a dedicated circuit. In addition, it will need to be installed on a separate circuit. A dedicated circuit will protect the appliance, and it will need a new fuse or breaker. In addition to these, it will provide additional safety to the property. In addition, a new plug is necessary if you need to use the same outlet as an existing one. Besides the basics of electrical wiring, a professional electrical service can also handle lighting and wiring. Interior and exterior residential lighting are important parts of any home, so choosing a good one is essential. Having the right kind of lights will give you more options to enjoy your backyard. In addition, dimmers allow you to select the best light schemes for your home. So, if you need assistance with wiring, electrical services are a good idea. Except wiring, an electrical service can help you with installation, repair, and maintenance. They can install new light fixtures in your home or office and can also handle repairs. Moreover, you can also use an electrical service to fix and install new lighting fixtures. These lights are not only functional, but they can be beautiful, too. You can also use them as decorative accents. You can get an electrician for a reasonable price. They will be happy to help you with your electrical needs.
Beware Of Space Heaters: They Must Be On A Dedicated Line

Residential>Troubleshooting & Repair ServicesGFCI OutletsAFCI BreakersWhole House Surge ProtectionElectrical Safety InspectionsSmoke & CO DetectorsGenerator InstallationElectrical Panel UpgradesDedicated CircuitsIndoor LightingLandscape LightingFan InstallationPool & Hot Tub WiringEV Charger InstallationWhole House RewiringHome Theater InstallationCommercial>Troubleshooting & Repair ServicesDedicated Computer CircuitsElectrical Safety InspectionsSurge ProtectionGenerator InstallationElectrical Panel UpgradesBucket Truck ServicesEquipment HookupsIndoor & Outdoor LightingReviewsService Areas>Montgomery County, PABucks County, PAChester County, PADelaware County, PABerks County, PAPhiladelphia County, PAPhotosTeamBlogDealsCommunityAchievementsComicsCareersCompaniesBeware Of Space Heaters: They Must Be On A Dedicated LineIt’s that time of year again. The cold air has finally entered the Southeastern, PA region, just in time for Christmas. Some of us are hoping for snow on the big day we gather to celebrate the birth of Christ. Others are envisioning a time when they are sprawled out on the beach again in the blazing sun with a romance novel. Either way, it’s winter-time in Pottstown, PA and many of us are dusting off the space heaters left in storage and plugging them in to keep warm. KB Electric LLC received a call today from a customer that needed his burnt outlet replaced. Upon arrival, we found out why the customer’s receptacle was burnt: he had a space heater plugged into it. Space heaters MUST be on a dedicated line to ensure proper safety of the unit and the safety of your home. If you use a space heater or are thinking about buying a space heater for a room in your home, please take the time to read this blog as we go into more depth about space heaters on a dedicated line. Please also refer to one of our previous blogs here to learn more about space heater safety. What Is a Dedicated Line?A dedicated line is a line that runs from your main electrical panel on its own circuit breaker to its own dedicated outlet/receptacle. This line/circuit is designated for only ONE appliance. Why Do Space Heaters Needs To Be On A Dedicated Line?The reason for a dedicated line is to not overload your electrical system because of its heavy electrical load that it produces. Dedicated lines prevent blown circuits and fuses, tripping breakers, electrical fires, overheating wires, and damage of appliances. Many appliances should have their own dedicated line and circuit breaker with dedicated outlet like refrigerators, microwaves, ranges, freezers, dryers, washing machines, space heaters, heaters, hot tubs, water pumps, sump pumps, A/C units, etc. (ANYTHING THAT DRAWS A LOT OF ELECTRICITY WHEN IN USE)Your space heater is an “appliance” that needs to be on its own circuit breaker and line with its own outlet/receptacle because it draws a lot of electricity. If the space heater shares a circuit with multiple things in use, it can overheat the wires, cause an electrical fire, damage the space heater, and burn your outlets. IT IS A FIRE HAZARD TO HAVE A SPACE HEATER SHARING A CIRCUIT WITH OTHER APPLIANCES/DEVICES. PLEASE BE AWARE OF THIS WHEN YOU ARE PLUGGING IN YOUR SPACE HEATER. Burnt Outlet From Space Heater Not On A Dedicated Line I Need a Dedicated Line For My Space Heater. Who Should I Call?A licensed and insured electrician should be the only professional to install a dedicated line for your space heater. A dedicated line for any appliance consists of a dedicated outlet, circuit breaker in your main electrical panel, and a dedicated wire/line running from your main panel to the dedicated outlet. An electrician has the hands-on experience to install dedicated lines, as well as the NEC knowledge to install them correctly and safely.Call KB Electric LLC today if you are in need of a dedicated line for your space heater. We are licensed and insured, family-owned and operated for over 15 years, and all of our technicians are background-checked, uniformed, and perform continuing education classes to be versed in the latest NEC requirements. (267) 467-3178 CATEGORIES4-Prong OutletsAbout KB Electric LLCAttic FansBallast ReplacementBathroom LightingBollard LightsCable Outlet InstallationCarbon Monoxide DetectorsCeiling Fan InstallationChandelier InstallationChristmas Light SafetyCircuit BreakersCommercial Electrical Safety InspectionsCommercial ElectricianCommercial LightingCurrent Events with ElectricityCurrent Events: EnergyDeck LightingDeck Receptacles/OutletsDedicated CircuitsDeicing CablesDimmer SwitchesDisposing Light BulbsDoorbellsDryer Booster FansElectricity and Energy InnovationsElectric Baseboard Heater InstallationElectric Car Charging InstallationElectric Radiant Floor HeatingElectrical InformationElectrical InnovationsElectrical Panel UpgradeElectrical Remodeling ServicesElectrical Safety InspectionsElectrician vs. Electrical InspectorElectricity BillElectromagnetic FieldsEmergency DisconnectsEmergency Lighting and Exit Sign LightingEnergy Saving TipsEthernet Wall JacksEV Charging SafetyExhaust FansFestoon LightingGarage WiringGeneratorsGFCIsHigh Bay LightingHire a Licensed ElectricianHistory of Ceiling FansHistory of the Dimmer SwitchHistory of Electric CarsHome Electric Car Charging InstallationHot Tub WiringHouse RewireIn The NewsIntercom SystemsKitchen LightingKnob & Tube WiringLED Ballast BypassLED Christmas LightsLED Retrofit LightingLEDsLi-Fi TechnologyLight Color TemperatureLightingLightning FactsLow Voltage Landscape LightingMotion SensorsMoonlightingOutlet SafetyOutdoor Ceiling FansOutdoor Home Security Lighting TipsOutdoor Lamp PostsOutdoor LightingOutdoor Outlet CoversOutdoor Receptacles/OutletsOutdoor Shed WiringParking Lot LightingPendant LightingPhotocell SensorsPool WiringPower and Communication PolesPrivate Utility PolesProperty Management ElectricianRange HoodsRecessed LightsRecessed OutletsRenewable EnergyRomex WiringRV Home Electrical HookupSafety & PreventionShed WiringSingle Phase to Three PhaseSmall BusinessesSmart Light SwitchesSmart OutletsSmart ThermostatsSmoke DetectorsSolar Powered ElectricitySpace HeatersStorefront LightingSurge ProtectionSwimming Pool Electrical SafetySwimming Pool Area LightingSwimming Pool LightingThanksgiving FunTools of the TradeTrack Lighting InstallationTransformersTunable White LEDsTV Wall Mount InstallationTwist Lock ReceptaclesUnder Cabinet LightingUSB OutletsVideo Doorbells The post Beware Of Space Heaters: They Must Be On A Dedicated Line appeared first on KB Electric LLC.
How to Replace a Light Switch

Due to the fact that light switches in our homes see so much use, it’s no surprise that they wear out and need replacing eventually. If you’ve noticed that a light switch in your home is loose, fails to control the light fixture, emits a buzzing or crackling noise, or otherwise malfunctions, it may be … Continue reading “How to Replace a Light Switch” The post How to Replace a Light Switch appeared first on Right Electrical Services LLC | #1 Raleigh Electricians. Did you miss our previous article… https://www.oregonelectricrailway.org/?p=293
Dryer Booster Fan: What Is It And How Does It Work?

Residential>Troubleshooting & Repair ServicesGFCI OutletsAFCI BreakersWhole House Surge ProtectionElectrical Safety InspectionsSmoke & CO DetectorsGenerator InstallationElectrical Panel UpgradesDedicated CircuitsIndoor LightingLandscape LightingFan InstallationPool & Hot Tub WiringEV Charger InstallationWhole House RewiringHome Theater InstallationCommercial>Troubleshooting & Repair ServicesDedicated Computer CircuitsElectrical Safety InspectionsSurge ProtectionGenerator InstallationElectrical Panel UpgradesBucket Truck ServicesEquipment HookupsIndoor & Outdoor LightingReviewsAreas We Serve>Montgomery County, PABucks County, PAChester County, PADelaware County, PABerks County, PAPhiladelphia County, PAPhotosOur TeamBlogDealsCommunity OutreachCompaniesCareersDryer Booster Fan: What Is It And How Does It Work? We recently got a call from a customer this week who was in need of a dryer booster fan replacement. We realized we haven’t done a blog about one of these bad boys yet, so of course it was a no-brainer that we write one today! Let’s get right into what a dryer vent booster fan is, how it works, why you may need one, and who to call for installation. What Is A Dryer Booster Fan? A dryer vent booster fan is a fan that connects to your dryer duct to help increase airflow. The boost in airflow with a fan like this allows for the successful removal of built-up dryer lint in your ductwork, as well as efficient drying time of your clothing. How Do Dryer Booster Fans Work? Dryer booster fans utilize backward inclined blades to effectively pull air out of the duct while allowing for other debris like dryer lint to pass through. Do I Need A Dryer Vent Fan? You may need a booster fan for your dryer if you are experiencing long drying times, if your duct run for your dryer is over 25 feet long, or if your duct run for your dryer has multiple bends. If you are noticing that you need continual duct cleanouts from dryer lint and debris, you may also benefit from a booster fan for your dryer. Benefits of Dryer Booster FansExtended ventilation.Reduced drying time for your clothing.Reduced energy consumption since your dryer won’t be running as long. (50% or more!)Reduce fire hazard of lint build-up.You won’t need continuous duct cleanouts from a professional. (saves you cash!) Who Can Install My Dryer Booster Fan? Hire a professional who is licensed and insured to install your new dryer vent fan. The master electricians at KB Electric LLC can help install any and all types of booster fans for any ductwork. We are licensed and insured, versed in the NEC (National Electric Code), and our techs have the proper tools and equipment for safe installation. Call us today! (267)-467-3178. CATEGORIES4-Prong OutletsAbout KB Electric LLCAttic FansBallast ReplacementBathroom LightingCable Outlet InstallationCarbon Monoxide DetectorsCeiling Fan InstallationChandelier InstallationChristmas Light SafetyCircuit BreakersCommercial Electrical Safety InspectionsCommercial ElectricianCommercial LightingCurrent Events with ElectricityCurrent Events: EnergyDeck LightingDeck Receptacles/OutletsDedicated CircuitsDeicing CablesDimmer SwitchesDisposing Light BulbsDoorbellsDryer Booster FansElectricity and Energy InnovationsElectric Baseboard Heater InstallationElectric Car Charging InstallationElectric Radiant Floor HeatingElectrical InformationElectrical InnovationsElectrical Panel UpgradeElectrical Remodeling ServicesElectrical Safety InspectionsElectrician vs. Electrical InspectorElectricity BillElectromagnetic FieldsEmergency DisconnectsEmergency Lighting and Exit Sign LightingEnergy Saving TipsEthernet Wall JacksEV Charging SafetyExhaust FansFestoon LightingGarage WiringGeneratorsGFCIsHigh Bay LightingHire a Licensed ElectricianHistory of Ceiling FansHistory of the Dimmer SwitchHistory of Electric CarsHome Electric Car Charging InstallationHot Tub WiringHouse RewireIn The NewsIntercom SystemsKitchen LightingKnob & Tube WiringLED Ballast BypassLED Christmas LightsLED Retrofit LightingLEDsLi-Fi TechnologyLight Color TemperatureLightingLightning FactsLow Voltage Landscape LightingMotion SensorsMoonlightingOutlet SafetyOutdoor Ceiling FansOutdoor Home Security Lighting TipsOutdoor Lamp PostsOutdoor LightingOutdoor Outlet CoversOutdoor Receptacles/OutletsOutdoor Shed WiringParking Lot LightingPendant LightingPhotocell SensorsPool WiringPower and Communication PolesProperty Management ElectricianRange HoodsRecessed LightsRecessed OutletsRenewable EnergyRomex WiringRV Home Electrical HookupSafety & PreventionShed WiringSingle Phase to Three PhaseSmall BusinessesSmart Light SwitchesSmart OutletsSmart ThermostatsSmoke DetectorsSolar Powered ElectricitySpace HeatersStorefront LightingSurge ProtectionSwimming Pool Electrical SafetySwimming Pool Area LightingSwimming Pool LightingThanksgiving FunTrack Lighting InstallationTransformersTunable White LEDsTV Wall Mount InstallationTwist Lock ReceptaclesUnder Cabinet LightingUSB OutletsVideo Doorbells The post Dryer Booster Fan: What Is It And How Does It Work? appeared first on KB Electric LLC.
Hardwired vs Plug-In EV Charging Installation: Which Is Better?

Residential>Troubleshooting & Repair ServicesGFCI OutletsAFCI BreakersWhole House Surge ProtectionElectrical Safety InspectionsSmoke & CO DetectorsGenerator InstallationElectrical Panel UpgradesDedicated CircuitsIndoor LightingLandscape LightingFan InstallationPool & Hot Tub WiringEV Charger InstallationWhole House RewiringHome Theater InstallationCommercial>Troubleshooting & Repair ServicesDedicated Computer CircuitsElectrical Safety InspectionsSurge ProtectionGenerator InstallationElectrical Panel UpgradesBucket Truck ServicesEquipment HookupsIndoor & Outdoor LightingReviewsAreas We Serve>Montgomery County, PABucks County, PAChester County, PADelaware County, PABerks County, PAPhiladelphia County, PAPhotosOur TeamBlogDealsCommunity OutreachCompaniesCareersHardwired vs Plug-In EV Charging Installation: Which Is Better?If you are on the market for a new electric vehicle (EV), you’re probably doing a lot of research on the best options for charging one. KB Electric LLC has been doing EV charger installations for quite some time, and the calls keep coming in to get them done. Many EV owners purchase a level 2 charger and have one of our master electricians install it for them. There are two options when installing your level 2 EV charger: a hardwired vs plug-in EV charging installation. So, which is better? Let’s take a look at what a level 2 EV charger is, the two options for installing one, and which option KB Electric LLC recommends for installation.Before we dabble with the details, no matter the hardwired type or plug-in, EV chargers should be installed by a professional. KB Electric LLCalways recommends that a licensed and insured electrician installs your EV home charger, especially if it is hardwired. Hardwired EV Charging Installation – Tesla Charger What Is a Level 2 EV Charger?A Level 2 EV Charger utilizes a 240v outlet, also known as a NEMA 50r receptacle (when not hardwired). This outlet is the same as the one your clothing dryer uses (if you don’t have a hardwired dryer). Level 2 EV chargers can take up to 6.5 hours to fully charge the battery using a brand like the ClipperCreek LEVEL 2 HCS-40PR. For most brands of EVs, level 2 chargers are typically 3 to 5 times faster to fully charge the battery than a level 1 EV charger (utilizes a 120v outlet). There are so many brands of level 2 EV chargers on the market. Most of these EV chargers can be installed inside or outside of your garage. Most of the level 2 EV chargers can also be hardwired instead of plugged in using the 240v outlet. What does hardwiring your EV charger entail? Let’s go over it. Hardwired vs Plug-In EV Charging Installation HardwiredWith a hardwired EV charging installation, an electrician installs a dedicated 60AMP line from your main electrical panel to the desired EV charger location. At KB Electric LLC, we install a fire-rated backboard, as well as the NEC code required sub-panel to terminate power to the unit if needed. For this installation, the EV charging unit does not utilize a 240v outlet since it is hardwired into your main panel. Hardwired EV Charger Installation Plug-InWith a plug-in EV charging installation, an electrician installs a 240v outlet also known as a NEMA 50r receptacle, at the desired EV charger location to plug into. Plug-In EV Charger Installation – NEMA 50r (240v) Receptacle Plug-In EV Charger Installation – NEMA 50r (240v) Receptacle Should I Get A Hardwired or Plug-In EV Charger Installation?At all comes down to preference. Personally for the owner at KB Electric LLC, the hardwired option looks the cleanest. So you can say it all comes down to aesthetic appeal. Just take a look at the two pictures above in the hardwired section of this blog . The cord on the EV charger rolls up nicely, and you don’t have any wires hanging down. It also poses less of a trip hazard from the cord being left out. Either way, the hardwired or the plug-in EV charger install can be executed by the master electricians at KB Electric LLC. Call us today for your EV charging installation! (267) 467-3178CATEGORIES4-Prong OutletsAbout KB Electric LLCAttic FansBallast ReplacementBathroom LightingCable Outlet InstallationCarbon Monoxide DetectorsCeiling Fan InstallationChandelier InstallationChristmas Light SafetyCircuit BreakersCommercial Electrical Safety InspectionsCommercial ElectricianCommercial LightingCurrent Events with ElectricityCurrent Events: EnergyDeck LightingDeck Receptacles/OutletsDedicated CircuitsDeicing CablesDimmer SwitchesDisposing Light BulbsDoorbellsDryer Booster FansElectricity and Energy InnovationsElectric Baseboard Heater InstallationElectric Car Charging InstallationElectric Radiant Floor HeatingElectrical InformationElectrical InnovationsElectrical Panel UpgradeElectrical Remodeling ServicesElectrical Safety InspectionsElectrician vs. Electrical InspectorElectricity BillElectromagnetic FieldsEmergency DisconnectsEmergency Lighting and Exit Sign LightingEnergy Saving TipsEthernet Wall JacksEV Charging SafetyExhaust FansFestoon LightingGarage WiringGeneratorsGFCIsHigh Bay LightingHire a Licensed ElectricianHistory of Ceiling FansHistory of the Dimmer SwitchHistory of Electric CarsHome Electric Car Charging InstallationHot Tub WiringHouse RewireIn The NewsIntercom SystemsKitchen LightingKnob & Tube WiringLED Ballast BypassLED Christmas LightsLED Retrofit LightingLEDsLi-Fi TechnologyLight Color TemperatureLightingLightning FactsLow Voltage Landscape LightingMotion SensorsMoonlightingOutlet SafetyOutdoor Ceiling FansOutdoor Home Security Lighting TipsOutdoor Lamp PostsOutdoor LightingOutdoor Outlet CoversOutdoor Receptacles/OutletsOutdoor Shed WiringParking Lot LightingPendant LightingPhotocell SensorsPool WiringPower and Communication PolesProperty Management ElectricianRange HoodsRecessed LightsRecessed OutletsRenewable EnergyRomex WiringRV Home Electrical HookupSafety & PreventionShed WiringSingle Phase to Three PhaseSmall BusinessesSmart Light SwitchesSmart OutletsSmart ThermostatsSmoke DetectorsSolar Powered ElectricitySpace HeatersStorefront LightingSurge ProtectionSwimming Pool Electrical SafetySwimming Pool Area LightingSwimming Pool LightingThanksgiving FunTrack Lighting InstallationTransformersTunable White LEDsTV Wall Mount InstallationTwist Lock ReceptaclesUnder Cabinet LightingUSB OutletsVideo Doorbells The post Hardwired vs Plug-In EV Charging Installation: Which Is Better? appeared first on KB Electric LLC.
Bedside Bearer: First Ever Wall Mounted, Motion-Activated Night-light Cup Holder

Residential>Troubleshooting & Repair ServicesGFCI OutletsAFCI BreakersWhole House Surge ProtectionElectrical Safety InspectionsSmoke & CO DetectorsGenerator InstallationElectrical Panel UpgradesDedicated CircuitsIndoor LightingLandscape LightingFan InstallationPool & Hot Tub WiringEV Charger InstallationWhole House RewiringHome Theater InstallationCommercial>Troubleshooting & Repair ServicesDedicated Computer CircuitsElectrical Safety InspectionsSurge ProtectionGenerator InstallationElectrical Panel UpgradesBucket Truck ServicesEquipment HookupsIndoor & Outdoor LightingReviewsAreas We Serve>Montgomery County, PABucks County, PAChester County, PADelaware County, PABerks County, PAPhiladelphia County, PAPhotosOur TeamBlogDealsCommunity OutreachCompaniesCareersBedside Bearer: First Ever Wall Mounted, Motion-Activated Night-light Cup HolderMeet the Bedside Bearer: the first ever wall mounted, motion-activated night-light cup holder equipped with a fiber optic LED light. This LED light wraps around the ring of the cup holder and is gentle on the eyes so as to not disturb your circadian rhythm. Fitting all types of drinkware, the Bedside Bearer is patent-pending, made in America, and installs to virtually all types of wall surfaces. But why a wall mounted cup holder you may ask? Isn’t that what my nightstand is for? Let’s give you a little background of how the Bedside Bearer came to fruition, describe how it works, the goal of the product, and the vision of the company behind this patent-pending invention. How The Bedside Bearer All BeganFirst of all, let’s explain why KB Electric LLC is blogging about the Bedside Bearer to begin with. Not only is it an electrical innovation that deals with LED fiber optics and is a first of its kind, but the owner of KB Electric LLC created it. That’s right! Owner and operator, Keith Busby of KB Electric LLC came up with this invention while laying in bed one night. If you know Keith like I do (because I’m his wife), you know that he constantly spills his glass of water onto his nightstand and floor in the middle of the night. He can’t see in the pitch black of the night, and constantly fumbles around looking for his cup of water to quench his dry mouth. The dropped glasses of water was so bad that while moving our old furniture into our new home, Keith noticed mold on the back of his nightstand. This is no joke.So, we laid there and after the thousandth time of spilling his water onto the floor, the lightbulb clicked on. “I need a cup holder with a light on it!” After the idea came to him, Keith called up his buddy, Kevin and they decided to create the one-of-a-kind invention. After three years of development and research and three prototypes later, the Bedside Bearer is patent-pending and almost ready for production. Why The Bedside Bearer?Made in America!Declutters your nightstand, giving you more space for books, reading glasses, tissues, iPad, mouth guard, smart phone, alarm clock, etc. (LESS CHANCE FOR SPILLS!)Perfect for quenching the thirst in the morning and in the middle of the night.Your drink can hang on your wall in smaller spaces without a nightstand.The illumination from the Bedside Bearer won’t wake your spouse, and you won’t need to turn on any bedroom lights.Gentle LED fiber optic light won’t disrupt circadian rhythm. Versatile: The Bedside Bearer isn’t justfor bedrooms. It can accommodate any space with minimal furniture like your garage/shed, RV camper, small living room, etc.Perfect gift ideas for anyone!Fits a wide variety of drinkware.Sleek design complements any home decor. How Does The Bedside Bearer Work?Once you attach your Bedside Bearer to any flat wall surface, you are all set for the Bedside Bearer to hold any type of drinkware. This motion-activated LED fiber optic cup holder operates with 2 AAA batteries. Just wave your hand in the vicinity of the cup holder, and the gentle LED light turns on via a motion sensor. The LED fiber optic light featured on the ring has a soft glow and is gentle on the eyes. It will give enough light to see your cup without disturbing or waking up your partner. Giving BackThe Bedside Bearer simplifies needing a drink at night, but there are many around the world who do not have access to any water at all, day or night. That is why 5% of the profits will go towards World Vision. This non-profit creates wells for people who need clean drinking water. Where Can I Buy a Bedside Bearer?The kickstarter page to help with funding for the production of the Bedside Bearer is coming soon! Check out the website for more info: bedsidebearer.comPlease send the company an email if you are interested in buying a Bedside Bearer and for up-to-date information about the process of its development. Email: [email protected] will update this section of the blog with the Bedside Beater kickstarter page when it goes live!CATEGORIES4-Prong OutletsAbout KB Electric LLCAttic FansBallast ReplacementBathroom LightingCable Outlet InstallationCarbon Monoxide DetectorsCeiling Fan InstallationChandelier InstallationChristmas Light SafetyCircuit BreakersCommercial Electrical Safety InspectionsCommercial ElectricianCommercial LightingCurrent Events with ElectricityCurrent Events: EnergyDeck LightingDeck Receptacles/OutletsDedicated CircuitsDeicing CablesDimmer SwitchesDisposing Light BulbsDoorbellsDryer Booster FansElectricity and Energy InnovationsElectric Baseboard Heater InstallationElectric Car Charging InstallationElectric Radiant Floor HeatingElectrical InformationElectrical InnovationsElectrical Panel UpgradeElectrical Remodeling ServicesElectrical Safety InspectionsElectrician vs. Electrical InspectorElectricity BillElectromagnetic FieldsEmergency DisconnectsEmergency Lighting and Exit Sign LightingEnergy Saving TipsEthernet Wall JacksEV Charging SafetyExhaust FansFestoon LightingGarage WiringGeneratorsGFCIsHigh Bay LightingHire a Licensed ElectricianHistory of Ceiling FansHistory of the Dimmer SwitchHistory of Electric CarsHome Electric Car Charging InstallationHot Tub WiringHouse RewireIn The NewsIntercom SystemsKitchen LightingKnob & Tube WiringLED Ballast BypassLED Christmas LightsLED Retrofit LightingLEDsLi-Fi TechnologyLight Color TemperatureLightingLightning FactsLow Voltage Landscape LightingMotion SensorsMoonlightingOutlet SafetyOutdoor Ceiling FansOutdoor Home Security Lighting TipsOutdoor Lamp PostsOutdoor LightingOutdoor Outlet CoversOutdoor Receptacles/OutletsOutdoor Shed WiringParking Lot LightingPendant LightingPhotocell SensorsPool WiringPower and Communication PolesProperty Management ElectricianRange HoodsRecessed LightsRecessed OutletsRenewable EnergyRomex WiringRV Home Electrical HookupSafety & PreventionShed WiringSingle Phase to Three PhaseSmall BusinessesSmart Light SwitchesSmart OutletsSmart ThermostatsSmoke DetectorsSolar Powered ElectricitySpace HeatersStorefront LightingSurge ProtectionSwimming Pool Electrical SafetySwimming Pool Area LightingSwimming Pool LightingThanksgiving FunTrack Lighting InstallationTransformersTunable White LEDsTV Wall Mount InstallationTwist Lock ReceptaclesUnder Cabinet LightingUSB OutletsVideo Doorbells The post Bedside Bearer: First Ever Wall Mounted, Motion-Activated Night-light Cup Holder appeared first on KB Electric LLC.

Oregon Electric Railway

Classification of Electrical Services You Might Need

Links

Categories

Recent Posts